Pure Sine vs. Modified Sine Wave Inverters – WhyGREENPower.org

Posted In Modified Sine Wave Inverters, Pure Sine Wave Inverters - By WhyGREENPower On Thursday, August 18th, 2011 With 0 Comments

Pure Sine vs. Modified Sine Wave Inverters

This is a brief overview on pure sine wave and modified sine wave inverters that are commonly used in both home solar and off grid applications.

  • Pure sine and modified sine waves

    Pure sine and modified sine waves

    Pure Sine vs. Modified Sine Wave Inverters

  • Pure sine and modified sine waves
  • Magnum Energy RD3924 3.9 kW Modified Sine Inverter
  • Xantrex 806-1210 PROwatt True Sine Wave Inverter
  • Outback Power True Sine Wave Inverters

Both photovoltaic modules and batteries use direct current (DC) power. We need an inverter to change the direct current to alternating current (AC) in order to utilize the power being generated in a home. In order to maximize energy output, it is important to select an inverter with the following characteristics:

  1. High efficiency
  2. Low standby losses
  3. High surge capacity
  4. Low harmonic distortion
One way of classifying inverters is to distinguish the AC output waveforms – these are pure sine wave and modified sine wave.

All grid tied inverters are pure sine (true sine) inverters, hence the grid, by nature, is a pure sine wave electricity source. The importance of pure sine wave or modified sine wave inverters may be apparent especially for off grid applications such as RV, boat or cabins. Off grid inverters are used for connecting a battery source or a solar PV system to an AC load such as a home applicance, a laptop charger, a TV.

Pure sine wave inverters are used to operate sensitive electronic devices that require high quality waveform with little harmonic distortion. In addition, they have high surge capacity which means they are able to exceed their rated wattage for a limited time. This enables power motors to start easily which can draw up to seven times their rated wattage during startup. Virtually any electronic device will operate with the output from a pure sine wave inverter.

Modified sine wave inverters (modified square wave or step wave) approximate a pure sine waveform. Modified sine wave inverters are designed to satisfy the efficiency requirements of the photovoltaic system while being less expensive than pure sine waveform inverters. These inverters are capable of operating a wide variety of loads; electronic and household items including but not limited to TV, VCR, and satellite receiver, computers, and printers.

Application

Some electronic devices may pick up inverter noise while operating with modified sine waveform. Using fluorescent lighting can be problematic when using modified sine wave inverters. Most of the equipment on the market is designed for use with sine waves. Some appliances, such as microwaves, drills, clocks or speed motors will not produce full output if they don’t use sine wave current, moreover they may damage the equipment. Some loads, such as light dimmers will not work without sine wave at all.

It’s safe to say any electronic device that requires sensitive calibration can only be used with pure sine wave inverters. For many electronic devices that don’t require sensitive calibration, modified sine wave inverters are a more cost-effective option. Despite the drawbacks associated with modified sine wave inverters, they are the most commonly used inverters on the market.

A little about us:

WhyGREENPower.org is on a quest to see how far we can push the limits of GREEN Power & technology on a residential home and we ask for your support.  We are a nonprofit & not trying to sell you anything.  We are simply trying to share what we learn about GREEN Power for all to leverage Help us get the word out?  At a minimum, if you wouldn’t mind “following”, forwarding & supporting WhyGREENPower.org on your favorite Social Network, that would be GREATLY appreciated!

What is this all about?:  WhyGREENPower.org shares GREEN alternative energy solutions like solar, wind and other technology to help towards independence from power bills & fuel costs… and even transportation costs.

Who?:  A group of industry GREEN experts have offered their assistance to show that GREEN Power is not onlygood for the earth, but your pocket book as well!

What?:  One of our first projects is to track the progress of one residential home for 12 months to see how far we can takeGREEN Power.  In the first month a savings of 41% was obtained on the first power bill. We will continue to track the progress and share what is learned along the way as we continue to make enhancements and leverage technology.  Did we mention the ROI including all incentives right now is less than 3 years.  Now it’s on to solve for the other 59%!  J

Are we selling anything?:  Simply. No.  Only advocating GREEN Power and sharing what we learn.

Up and coming GREEN!:  So you know about our quest to reduce the power bills.  What you might not know is this fall we will start a separate project to leverage the GREEN Power from the house to charge a electric vehicle (EV). Good bye  $4 dollars a gallon!  Stay tuned. Stay GREEN.

 Have an idea?:  We would love to hear from you.  Have an idea for the a blog post? suggestions@WhyGREENPower.org

Let’s share, learn, and promote GREEN Power!

Your friends at WhyGREENPower.org,

”Not all who wander are lost…” – j.r.r. Tolkien

PS – Did you know?:  The federal Tax Code (HR-1424) is offering, through 2016, a 30% Tax Credit on batteries, panels, wiring, and installation costs associated with a GREEN Power purchase.

Leave a comment